Tutorials › Calculus II › Infinite Geometric Series from Partial Sums

Series and Partial Sums · Tutorial 556 of 998

Infinite Geometric Series from Partial Sums

Learn how the finite geometric-sum formula leads to the infinite sum when the common ratio has absolute value less than one.

Beginner 9 min read

What You'll Learn

  • Write the partial sums of a geometric series whose first term is one.
  • Use the finite geometric-sum formula to express each partial sum.
  • Explain why powers of a ratio with absolute value less than one approach zero.
  • Derive the infinite sum from the limit of the partial sums.
  • Check when the resulting formula applies and identify a case where it fails.

From Finite Sums to an Infinite Sum

A finite geometric sum has a simple formula, but an infinite series is not evaluated by substituting infinity into that formula. Instead, its value is defined through the limit of its finite partial sums. For a geometric series, the finite formula makes this limit accessible: when the common ratio has absolute value less than one, the powers of the ratio shrink to zero.

We will focus on the geometric series whose first term is one:

$$ 1+r+r^2+r^3+\cdots. $$

Here \(r\) is the common ratio: each term after the first is obtained by multiplying the preceding term by \(r\). The condition \(|r|<1\) is crucial. It ensures that the finite partial sums approach a limit, and it determines when the infinite-series formula derived below is valid.

Definition: For a real number \(r\), the geometric series with first term one is \(\sum_{k=0}^{\infty}r^k\). Its \(N\)th partial sum is \(S_N=\sum_{k=0}^{N}r^k\). The series converges to \(S\) if the sequence of partial sums has the finite limit \(S\) as \(N\) tends to infinity.

The index starts at zero, so \(r^0=1\) is the first term. The partial sum \(S_N\) includes the terms from \(r^0\) through \(r^N\), giving \(N+1\) terms. Keeping this indexing clear matters: the exponent in the finite-sum formula will be \(N+1\).

The Finite Partial-Sum Formula

For \(r\ne 1\), the finite geometric-sum formula is

$$ S_N=1+r+r^2+\cdots+r^N=\frac{1-r^{N+1}}{1-r}. $$

One way to see why this formula holds is to multiply the sum by \(r\), then subtract. The two expressions have matching terms except for the first and last powers:

$$ \begin{aligned} S_N&=1+r+r^2+\cdots+r^N,\\ rS_N&=r+r^2+r^3+\cdots+r^{N+1},\\ S_N-rS_N&=1-r^{N+1}. \end{aligned} $$

Since \(S_N-rS_N=(1-r)S_N\), division by \(1-r\) gives the formula. In the case considered here, \(|r|<1\) implies \(r\ne 1\), so its denominator is not zero.

Why the Powers Approach Zero

To take the limit of \(S_N\), we need to know what happens to \(r^{N+1}\). The key fact is that if \(|r|<1\), then \(r^n\) tends to zero as \(n\) tends to infinity. Here is a direct justification.

Lemma: If \(|r|<1\), then \(\lim_{n\to\infty}r^n=0\).

If \(r=0\), every positive power is zero, so the result holds immediately. Otherwise, let \(q=|r|\), so \(0<q<1\), and set \(h=1/q-1\). Then \(h>0\) and \(1/q=1+h\). The binomial inequality \((1+h)^n\ge 1+nh\) follows by induction: it holds for \(n=1\), and multiplying the inequality for \(n\) by \(1+h\) gives

$$ (1+h)^{n+1}\ge(1+nh)(1+h) =1+(n+1)h+nh^2 \ge1+(n+1)h. $$

Taking reciprocals of positive quantities now gives

$$ 0\le q^n=\frac{1}{(1+h)^n}\le\frac{1}{1+nh}. $$

For any \(\varepsilon>0\), choose a natural number \(N\) large enough that \(1/(1+Nh)<\varepsilon\). For every \(n\ge N\), the bound above gives \(0\le q^n<\varepsilon\). Thus \(q^n\) tends to zero. Since \(|r^n|=q^n\), it follows that \(r^n\) also tends to zero.

Deriving the Infinite Sum

We can now take the limit of the finite partial sums. The argument uses both the finite formula and the condition \(|r|<1\); without that condition, the same limit step is not justified.

1
Write the partial sum.
For each \(N\), the sum of the first \(N+1\) terms is \(S_N=(1-r^{N+1})/(1-r)\), provided \(r\ne1\).
2
Use the condition on the ratio.
When \(|r|<1\), the lemma shows that \(r^{N+1}\) tends to zero as \(N\) tends to infinity.
3
Take the limit.
The denominator \(1-r\) is fixed and nonzero, so the limit of the partial sums is \(1/(1-r)\).
$$ \begin{aligned} \lim_{N\to\infty}S_N &=\lim_{N\to\infty}\frac{1-r^{N+1}}{1-r}\\ &=\frac{1-0}{1-r}\\ &=\frac{1}{1-r}. \end{aligned} $$
Theorem: If \(r\) is real and \(|r|<1\), then the geometric series with first term one converges, and its sum is $$ \sum_{k=0}^{\infty}r^k=\frac{1}{1-r}. $$ This equality follows from the limit of the partial sums; the condition \(|r|<1\) is required.

Worked Examples

Worked Example: The Ratio Is One Half

Find the value of \(1+\frac12+\frac14+\frac18+\cdots\) using partial sums, and check the result.

Here \(r=\frac12\), and \(\left|\frac12\right|<1\), so the theorem applies. The \(N\)th partial sum is

$$ S_N=\frac{1-(1/2)^{N+1}}{1-1/2}. $$

The denominator is \(1-\frac12=\frac12\), so

$$ S_N=2\left(1-\left(\frac12\right)^{N+1}\right). $$

As \(N\) tends to infinity, \((1/2)^{N+1}\) tends to zero. Therefore

$$ \lim_{N\to\infty}S_N=2(1-0)=2. $$

Check with a finite partial sum: for \(N=3\), the terms are \(1,\frac12,\frac14,\frac18\). Their sum is \(\frac{8+4+2+1}{8}=\frac{15}{8}\). The formula also gives \(S_3=2(1-\frac1{16})=\frac{15}{8}\). The limit value is consistent: \(2-\frac{15}{8}=\frac18\), exactly the amount by which this partial sum falls short of \(2\).

Worked Example: The Ratio Is Two Thirds

Find the sum of \(1+\frac23+\frac49+\frac8{27}+\cdots\), and verify the formula using the first four terms.

Here \(r=\frac23\), and \(\left|\frac23\right|<1\). The partial sums satisfy

$$ S_N=\frac{1-(2/3)^{N+1}}{1-2/3} =\frac{1-(2/3)^{N+1}}{1/3}. $$

The power \((2/3)^{N+1}\) tends to zero, so

$$ \lim_{N\to\infty}S_N=\frac{1}{1/3}=3. $$

For the first four terms, \(N=3\). Direct addition gives

$$ 1+\frac23+\frac49+\frac8{27} =\frac{27+18+12+8}{27} =\frac{65}{27}. $$

The partial-sum formula agrees:

$$ S_3=\frac{1-(2/3)^4}{1/3} =\frac{1-16/81}{1/3} =\frac{65/81}{1/3} =\frac{65}{27}. $$

Finally, \(3-\frac{65}{27}=\frac{81-65}{27}=\frac{16}{27}\), which checks the difference between the limiting value and this particular partial sum.

Worked Example: A Short Partial Sum and Its Limit

Consider \(1+\frac14+\frac1{16}+\frac1{64}+\cdots\). Find the sum and check it against the partial sum through \(r^2\).

The common ratio is \(r=\frac14\), so \(|r|<1\). The infinite sum is

$$ \frac{1}{1-r} =\frac{1}{1-1/4} =\frac{1}{3/4} =\frac43. $$

The partial sum through \(r^2\) is \(S_2\), because its terms have exponents \(0,1,2\):

$$ S_2=1+\frac14+\frac1{16} =\frac{16+4+1}{16} =\frac{21}{16}. $$

Using the finite formula gives the same value:

$$ S_2=\frac{1-(1/4)^3}{1-1/4} =\frac{1-1/64}{3/4} =\frac{63}{64}\cdot\frac43 =\frac{21}{16}. $$

The limiting value exceeds this partial sum by \(\frac43-\frac{21}{16}=\frac{64-63}{48}=\frac1{48}\). This confirms the arithmetic for the selected finite sum while the limit calculation gives the value of the entire series.

Why the Condition Matters

The formula \(\frac{1}{1-r}\) is not a rule that applies to every geometric series. It was obtained by taking a limit, and that step depended on \(r^{N+1}\) tending to zero. For example, if \(r=2\), the partial sums are

$$ S_N=1+2+2^2+\cdots+2^N =\frac{1-2^{N+1}}{1-2} =2^{N+1}-1. $$

These partial sums grow without bound; they do not approach a finite value. Although substituting \(r=2\) into \(1/(1-r)\) produces \(-1\), that number is not the sum of this series. The derivation of the infinite-sum formula does not apply because \(|2|<1\) is false.

A common mistake is to quote the finite geometric formula, replace \(r^{N+1}\) by zero, and conclude that the result holds for any ratio. The replacement is legitimate only when the powers actually tend to zero. A second indexing mistake is to use \(r^N\) where the finite sum ends at \(r^N\): the difference \(S_N-rS_N\) contains \(1-r^{N+1}\), not \(1-r^N\).

Key takeaway: For the series \(1+r+r^2+\cdots\), first check \(|r|<1\). Then the finite partial sums have a limit, and that limit is \(1/(1-r)\). The formula is a consequence of convergence, not a substitute for checking it.

Check Your Understanding

Use partial sums and the condition on the common ratio to answer these questions.

  1. Write the \(N\)th partial sum of \(1+\frac13+\frac19+\cdots\) using the finite geometric-sum formula.
  2. What is the sum of \(1+\frac13+\frac19+\cdots\), and which condition permits the limit step?
  3. For \(r=\frac12\), calculate \(S_2\) both by adding the terms and by using the finite formula.
  4. Explain why the formula \(1/(1-r)\) cannot be used to assign a sum to \(1+2+4+8+\cdots\).
  5. In the expression for \(S_N\), why does the numerator contain \(r^{N+1}\) rather than \(r^N\)?

Test yourself: Calculus II final exam practice

Ready to check what you know? Work a full-length practice final, then open the complete worked solutions.

Want all 1,114 practice problems?

This tutorial covers one topic. Calc Pass covers the full Calculus AB & BC curriculum (the core of Calculus I and II): full review, every practice question, and step-by-step solutions to each one.

QR code to download the Calc Pass app

Get the Calc Pass App

Scan to download and practice on the go, with instant scoring.

Calc Pass Volume 1: 1,114 Practice Questions book cover

Vol. 1: 1,114 Questions

The complete practice question bank, organized by AB & BC topic.

View on Amazon
Calc Pass Volume 2: Solutions Manual book cover

Vol. 2: Solutions Manual

Fully worked solutions to every question in Volume 1.

View on Amazon